Question: We recently purchased a home in Santa Barbara that was built in the 1960s and had a complete kitchen remodel about 10 years ago.
All the kitchen cabinets and countertops were replaced, which we love, but the kitchen ceiling has long florescent tube lights set inside a recessed area covered with plastic panels that my wife thinks looks just terrible!
What can we do to make the ceiling and lighting more attractive without tearing out the entire ceiling?
Your Handyman: Your kitchen has what is often referred to as a drop ceiling with a lighting recess, or alcove, that was a very popular way to finish off a kitchen ceiling in the 1960s and ’70s. For the most part, it has gone the way of the avocado green refrigerator, burnt orange countertops and bright red shag carpeting.
Typically, shop- or garage-style florescent light fixtures with 4-inch-long light tubes were screwed to the top of the ceiling alcove, either a wood or metal grid was suspended over the opening of the recess, and then opaque plastic diffuser panels were set into the grid as a way to hide the light fixtures and evenly illuminate the kitchen.
These plastic diffuser panels had a textured surface on the exposed side that quickly accumulated oil and grease from cooking, lint and dust was attracted to the oils, and the panels required regular cleaning or replacement in order to look fresh.
There are a couple of relatively inexpensive ways to redo this type of ceiling without breaking the bank or causing a giant disruption to your household.
The first option is to remove the old plastic panels, grid and florescent lights, finish off the old recess drywall surfaces, and then install a new surface-mounted light fixture(s) or LED can lights using the same electrical circuit and switch that the florescent tubes were on.
Usually, the recessed surfaces were covered with drywall when the kitchen was built, but often the drywall was not textured completely when the rest of the ceiling was textured, since the plan was for it to not be exposed.
If the drywall texture matches and the exposed perimeter outside edges are finished, then possibly no additional drywall work will need to be done.
This usually is not the case, and a metal corner bead will need to be installed on the outside perimeter edge, there may be a patch or two required in the recess, and it will often require texture and, of course, painting.
A nice finishing detail after the drywall work is completed is to install crown molding along the top inside corner that can either be a stand-alone detail or match a crown molding already installed along the cabinet tops or the dining area ceilings.
Installing new light fixtures or can lights on the new exposed ceiling of the recess is a relatively easy task for an electrician, and a larger light fixture can be set into the recess without it becoming a low-hanging obstacle.
A dimmer switch can be installed in place of the old wall switch so that the level of light intensity can be adjusted for the occasion. If your new light is LED, be sure that the new wall switch and dimmer are compatible with LED lighting.
The second option for redoing the ceiling is to simply cover the recess with a new layer of drywall and install recessed can lights into what was the old recess.
This new drywall work will probably mean that the entire ceiling needs to be texture sprayed in order to blend in the overall appearance before being painted, which will require that all the cabinets, countertops and appliances are masked off with plastic prior to being sprayed.
I personally prefer the first option of leaving the recess open because it gives new height to the kitchen and creates space for an attractive new light fixture.
When finished off with a larger crown molding your kitchen ceiling has been given a simple yet very attractive makeover without breaking the bank or creating a huge remodeling headache.
• • •
Question: Our bathroom walls and ceiling were painted in a color we hated by the previous owners of our house, and my husband and I carefully repainted them last year.
Well, the new paint looked great up until recently, but now there are several areas where the new paint is starting to peel.
The bathroom has a good fan, so moisture isn’t a problem, and the walls and ceiling were in good shape before we painted.
What went wrong?
Your Handyman: Peeling paint is commonly found in bathrooms and kitchens where semi-gloss or gloss paint was originally used to allow for easy cleaning.
When painting over an existing painted surface that has any amount of sheen or gloss, it is very important to first pass over the old surface with fine grit sandpaper prior to applying the new paint.
This is done to provide what painters refer to as “tooth” on the old surface, which means it gives the old paint a slightly rough surface for the new paint to grab onto.
The old paint does not need to be sanded as much as just lightly passed over with the sandpaper grit to create very small scratches and abrasions to break up the smooth surfaces of the paint.
If new paint is applied over old paint that has a smooth and shiny surface, it is more difficult for the new paint to adhere. In the absence of moisture or wall damage, this is often why paint will peel, especially in a bathroom or kitchen.
If the original paint is more than 20 years old, it may be oil-based. Since most new paint is latex or acrylic, a coat of primer may be needed before applying the new color. A knowledgeable person at the local paint store can help with the selection of the right primer and paint.
People often make the mistake of considering painting to be a trade that anyone can do without training. Like most every skill in life, however, there is no substitute for experience.
Always try to take the time to do a little research before starting on even the simplest home repair projects. The job will go smoother and you will be happier with the results.
MORE MARK BAIRD
